A, The transportation

1) Unplug the power plug.

2) moves, be careful not to hurt the electric wire.

3) Keep the body of the freezer unit balanced during the transportation.

4) Neither expose the product directly under the sunlight, nor place it near any kinds of heating apparatus, so as not to weaken the refrigeration effect.

5) The freezers should be placed in a dry and ventilated place instead of a place which is wet or full of lampblack.

6) Leave an enough space for the product, there are should be more than 250px away from other objects, the refrigeration capacity will be reduced if there is no enough space and poorly ventilated.

7) Every packing material should be removed before using the unit.

8) The unit should be placed evenly in order to avoid an unsteady noise and movement .

B The settlement

1) Power supply requirements: 220 v, 50 hz; With a separate power supply of 16 A power flashboard;

2) Must be installed for this product reliable ground, the ground may neither be connected to the gas pipe, water pipe, nor use the single-phase power supply.

3) Hold the plug, instead of pulling the power cord when plug it on.

4) after all the work above, press the cooling switch to connect the power supply, set the startup protection time for 1 minute, and wait patiently, check whether the compressor and the fan are in normal operation or not, the temperature in the freezer shall be decreased obviously within half an hour.

Note: please read the product manual carefully before using!