There is a noticed rated power consumption on every Andeli ice cream display freezer after they are perfectly finished producing. A rated power consumption is refer to a power consumption for running the ice cream display freezer for 24 hours with the environment temperature of 25 degrees Celsius. In the process of actual use, sometimes the actual power consumption is higher than the rated power consumption for the use and maintenance problems. But sometimes the actual power consumption is lower than the rated power consumption without defrosting and result in defective refrigeration effect.

Ice Cream Display Freezers

Firstly, the influence of frost for ice cream display freezers

1, the power consumption increased. Frost layer will reduce its cooling performance, after the frost will affect the efficiency of heat exchange, which results in the loss of refrigeration capacity, make the compressor work continuously, thereby increasing power consumption.

2, Cause damage to the compressor. After get frosted , the temperature will hard to come down, get the compressor hot by unstop working and easy to burn out the compressor.

3, Producing peculiar smell, affect the safety storage of food.

Secondly, incase of defrosting method, when frost laminated to 5 mm thick, should to defrost.

1, If the thickness of the frost gets about 5 mm to 20 mm, use a small plastic shovels top-down, to scrape the frost layer from top to down gently, and finally remove the rest with a warm wet tower.

2, If the thickness of the frost gets more than 20 mm and form ice in the freezer, which is hard to remove the ice with a shovel, this time we can use pour hot water (60 degree Celsius )from the top to the root. Inside the icy area . (all the display items should be removed from the unit, after being wrapped and sealed.